OR ELSE
Custom Downwind Boards Made in France
A downwind SUP and wing foil board for true sea lovers and freedom seekers.
Designed to be comfortable in all conditions in the Mediterranean, it’s the “easier” version of the Offshore Line, slightly wider than its “Expert” variant for increased stability.
You can cruise comfortably whatever the wind. If you had to have only one wing foil board, this would be it.
PVC carbon/carbon sandwich or carbon honeycomb construction on a very low density foam with a beam that gives it the extra stiffness for better efficiency.
Now equipped standard with our high performance US carbon box.
Materials: Carbon fiber, Entropy One© biosourced epoxy, Nomex© aramid honeycomb, Airex© PVC foam (sandwich), EPS core, upcycled Airbus© carbon fibers, Map Yachting© boat varnish.
Colors available: Fluorescent Orange, Fluorescent Yellow, Steel Blue, Custom Color.
High performance carbon US Box
Gore-Tex© venting valve
FCS© leash plug
Carrying handle
Full customization available. Please allow 24h to get back to you with a design proposal.
Size variants:
5'10" x 20 1/8" x 70L
6'5" x 22" x 90L
6'9" x 23 1/8" x 110L
Lead time 6-8 weeks depending on production schedule.
Board sold alone, stainless screw set included.
The shape
Our Offshore Downwind line is intended for those who want to explore the high seas and enjoy long downwind sessions or light wind cruising.
The wet surface is reduced to a minimum thanks to an elongated shape and minimum beam for the Expert model or moderate beam for the Cruise model. Yet, our downwind boards provide exceptional stability thanks to its tulip-shaped rails that extend from the stern to the beam.
The bow is bulb-shaped to add volume and avoid getting stuck in catching waves. We get a lot of those here in the Mediterranean as our wave periods tend to be quite short.
Technology
Internal Structure 1
Standard: Full Carbon Vacuum Build
| A | Low density EPS foam core 3D engineered in France |
| B | Airex© / carbon sandwich structural beam Deck / hull interface, IPN beam principle, extreme stiffness |
| C | Twill carbon fabric 2 sandwich layers with extra reinforcement strips on rails |
| D | Airex© PVC Sandwich Core Sandwich reinforcement under deck |
| E | In-house US-standard foil box plate Vacuum infused Carbon / Soric© double sandwich plate, routed to USBox standards and secured with structural epoxy glue, then laminated under one layer of carbon |
| F | US-standard box rails Airex© / carbon sandwich bloc routed with US rails, laminated top and bottom and bound to the internal beam |
| G | Twill carbon fabric 2 sandwich layers with extra reinforcement strips on rails |
Internal Structure 2
Optional: Honeycomb Pro Build
| A | Hull-side carbon fabric 2 layers |
| B | Twill carbon fabric 2 sandwich layers with extra reinforcement strips on rails |
| C | Nomex© aramid honeycomb Partial sandwich under deck |
| D | Airex© / carbon sandwich structural beam Deck / hull interface, IPN beam principle, extreme stiffness |
| E | In-house US-standard foil box plate Vacuum infused Carbon / Soric© double sandwich plate, routed to USBox standards and secured with structural epoxy glue, then laminated under one layer of carbon |
| F | US-standard box rails Airex© / carbon sandwich bloc routed with US rails, laminated top and bottom and bound to the internal beam |
Gallery
